This 3D-printed eagle bookmark captures the sharp gaze and powerful presence of an eagle, symbolizing courage, wisdom, and freedom. The embossed design gives it a great texture, making it feel like the eagle is right in front of you, locking onto its prey. Hope it accompanies you in your reading, reminding you to stay focused and explore fearlessly!

If you are interested in my work and want to learn more about me and my creations, follow me here: [https://linktr.ee/Terry.creation](https://linktr.ee/Terry.creation). 

I’d greatly appreciate your support on Buy Me a Coffee: [https://ko-fi.com/terrycreation](https://ko-fi.com/terrycreation). 

For commercial licenses, visit: [https://patreon.com/TerryCreation](https://patreon.com/TerryCreation).

Printing Instruction

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

The Model is 72x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA BambuLab Matte Scarlet Red Transmission Distance: 2
    PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 5 unique filaments

Swap Instructions:
    Start with Jade White
    At layer #18 (0.88mm) swap to Ash Gray
    At layer #27 (1.24mm) swap to Charcoal
    At layer #32 (1.44mm) swap to Scarlet Red
    At layer #42 (1.84mm) swap to Yellow for the rest.