Sonic Running Grayscale Hueforge

Project: sonic running2 stl.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x177.93mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 2.9
    PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
    PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Blue Gray
    At layer #14 (1.2mm) swap to Ash Gray
    At layer #18 (1.52mm) swap to White for the rest.

Descrição