New V2 print profiles added! Faster AND smoother action on the fidgets. Using 0.6mm layer width decreased print time and gave a better finished result. 4x eggs in just under 1 hour, or a single egg in under 20 mins and only ~13g per egg. 4x with AMS as well as single egg profiles added, give them a try and let me know how they go!

I've noticed if your filament type is not set to Bambu PLA Basic in your printer, the slicer may use default filament profiles at 55C plate temp instead. I've added a few additional types (Generic PLA, eSUN PLA+, and Generic PLA Silk, ones that I commonly use) at the hotter 65C temperature, but I don't know for sure if they'll apply to the print. Just keep an eye on it, and if you have any adhesion issues, just bump up the plate temp to 65C after the print starts.

I created a simple profile of an egg in Fusion used the offset tool to make each of the layers, then added the profile. 

We have loved a ton of these style of fidgets as hearts, hexagons, clovers, etc. and wanted to make some egg-shaped ones for Easter baskets, etc. It's very fun to play with and prints quickly. About the same size as a real egg, roughly 2" x 2.75" printed (53x67mm).