Minecraft logo bookmark in 4 colors. Color options in the directions! 

If you like Minecraft, check out my Minecraft Diamond Hunter (pictured below) exclusive on my Patreon. 

----------------------------

My designs are for personal printing use only. 

A commercial license to sell printed copies of my Makerworld Designs is available. 

I also post exclusive designs on my Patreon. A commercial license to sell BOTH my Makerworld and Patreon files can be found here: [https://www.patreon.com/busykikibee](https://www.patreon.com/busykikibee)

----------------------------

All photos you see are of the actual print of my design. If you use the same filament and colors, you can expect the same result as you see in the photos. The 3mf file is AMS ready to slice and print with the height range modifier and layers prepared for you. If you are using the STL to slice and print the file, be sure to apply color swaps by their mm height and use the height modifications and infill instructions as per the directions provided. During slicing, you might get an error message about floating regions, which you can safely ignore. Finally, if you wish to scale the design, do NOT scale the Z axis. Happy printing! 

Project: Minecraft Bookmark
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x50mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 1.9mm and the Actual Depth is 1.9mm

This print uses 4 unique filaments
PLA BambuLab Basic Black 
PLA BambuLab Basic Green (or Mistletoe)
PLA BambuLab Matte Terracotta Brown (or Matte Dark Chocolate or Basic Brown)
PLA BambuLab Matte Ivory White

Swap Instructions:
Start with Black
At 0.64mm swap to Green
At 0.96mm swap to Terracotta 
At 1.28mm swap to Ivory White for the rest.
Note: if you use Basic Brown instead of Terracotta, I suggest you swap to White at 1.36mm instead of 1.28mm.