A semi-detailed model of a Brigantine type sailboat that is fully 3d printable. 

Before printing: 

• Please note that there are some small pieces needed to build this ship
• Having a way to remove thin objects from the build plate (e.g. scraper) is advised

Change log:

• Added a second print profile with a different and updated hull design 

Build guide:

The 3d printed cables can be cut to length after connecting, a simple way to stop them from falling off is to bend them slightly. 

I chose to reduce the amount of rigging a bit in my build, however feel free to make it as complex or simple as you want. 

• Step 1: Clean off the supports 

  

  

• Step 2 : Assemble the masts. 

  

  

  

• Step 3: Connect the rudder 

• Step 4: Use the “cables” to connect the sails to the masts. (Having them all go on the same side makes the end result look cleaner)

  

• Step 5: Place the masts on the hull (The smaller one in the back)

  

• Step 6: Connect the Side Rigging as shown in the picture

  

• Step 7: Place the Bell on the deck

  

• 

• Step 8: Connect the front Sails and bowsprit

  

  - Place the model on the stand 

Connecting parts numbered: