An easy to use cable organiser. Only one part, simply wind up the cable and clamp it.

Adjustable length to fit your cable. 
 
For cable diameters from 3 up to 4,5mm.  
Works best with very flexible cables. 

NEW: Holder for skadis wall released! 

Size overview: 

The lengths given are only a rough recommendation. It depends on the stiffness and thickness of the cables 

You can find the spacer + connector pins on additional print plates in the print profile. If you like, you can scale the spacer and connector pins to any length in Bambu Studio. Just make sure you scale both parts identically. 

Example: If you make the spacer 10mm longer, then you also need to make the connector pin 10mm longer.

Assembly: 

Step 1: Press the connector pin into the first main body: 

If you have chosen the connector pin without spacer, continue with step 3.

Step 2: Press the spacer onto the connector pin: 

Step 3: Press the second main body onto the connector pin: 

Test it with your cable. Either replace the spacer with a different length or add a drop of glue if it fits.