The Model is 100x100mm in size
 

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA Default White Transmission Distance: 5
 

This print uses 5 unique filaments

Swap Instructions:
  

  Start with Black
    At layer #10 (0.88mm) swap to Blue
    At layer #14 (1.2mm) swap to Jade White
    At layer #19 (1.6mm) swap to Yellow
    At layer #23 (1.92mm) swap to White for the rest.