Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50x148.75mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
    PLA Aurapol Black Transmission Distance: 0.3
    PLA Aurapol Grandma Gray Transmission Distance: 3
    PLA Aurapol White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Grey
    At layer #18 (1.52mm) swap to White for the rest.