A square lithophone light box that rotates. This makes a great gift.  Do not use PolyLit PLA Pro for the lithophanes as it won't work (recommend Sunlu White personally).

See assembly guide for full instructions

Non-3D Printed Items Needed:

1. The Makersupply items listed below
2. 4 pictures (cropped 1:1 ratio preferably) (5 pictures if you are using the lithophane lid)
3. *Optional: USB Extension Cord (the cord in the bundle is very short)
4. *Optional: Smart Plug (You can set an on/off schedule for the light)

3D Prints:

Plate 1: Base; 1 needed
Plate 2: Base Cap; 1 needed
Plate 2: Motor Cap; 1 needed
Plate 2: Pin; 4 needed
Plate 2: Gear; 1 needed
Plate 3: Rotating Base; 1 needed
Plate 4: Frame; 1 needed
Plate 5: Lid; 1 needed*
Plate 6: Lid – Hearts; 1 needed*
Plate 7: Lid – Paw; 1 needed*
Plate 8: Lid – Wedding Bells; 1 needed*
Plate 9: Lid - Lithophane; 1 needed*
Plate 10: Light Mount; 1 needed
Plate 10: Light Clip; 2 needed
*Only one of the 5 Lid options is needed

ItsLitho.com Settings (Side Lithophanes):

Shape: Plane

Width: 110mm
Height: 110mm
Min Thick: 0.8mm

Max Thick: 5mm
Depth: 4mm

Angle: 45 deg

Mm per Pixel: 0.1mm

Preview Model: Native

ItsLitho.com Settings (Top Lithophane):

Shape: Plane

Width: 109mm
Height: 109mm
Min Thick: 0.8mm

Max Thick: 5mm
Depth: 4mm

Angle: 45 deg

Mm per Pixel: 0.1mm

Preview Model: Native

See all my lithophane light box designs at [https://makerworld.com/en/collections/14413396-lithophane-light-boxes](https://makerworld.com/en/collections/14413396-lithophane-light-boxes)