Low profile socket organizers for deep and regular sockets in three drive sizes.  The holes are generally a littler larger to accommodate different socket brands. I used Craftsman, Husky, and Kobalt for most of the sizing. For the 3/8" and 1/2" drive The label slots are designed for an 18x9 label and can be glued in. The Quarter Inch drive sockets labels are 13"x6.5" in size. You can just reduce the size of the standard label in your slicer. There are some snap fit labels for gridfinity socket holders that work with these. You can find them by searching Makerworld or other sites. 
The trays for the larger sockets are split in two and can be connected together with the dovetail connectors provided.

Two trays are provided to hold Torx or Allen sockets. These also use the 16x9 labels. All of the holes are the same size.

All trays were printed with PLA Matte.

I printed them for metric sockets but it should hold Imperial sockets as well. Trays hold the standard increments for the following socket sizes. 
1/2 Lower  (10 - 15)
1/2 Upper  (16,17,18,19,21)
3/8 Lower  (8 - 14)
3/8 Upper  (15 - 19)  
1/4 All (4 - 14)