This was a quick design i came up with to utilize an inexpensive mouse board for testing a different mouse shell shape i had resin printed. Uses a cheap amazon wireless rechargeable crappy mouse board with some modification. I cut off the backlight rgb leds and the side mouse buttons off the pcb. Total weight ended up coming in around 40g with the stock large 450mah battery,  i have a 120mah battery on order i think the weight should be near the 32~33g weight.

[https://a.co/d/jlZcaP7](https://a.co/d/jlZcaP7) link to mouse used, don't expect much its not a good mouse.

I also used 2 m2x4 screws and 4 m2x6 screws

The raw stl files for the shell and mouse wheel i printed on a resin printer so i assume you will not be able to achieve the same resolution as pictures provided.