[3DP RNS] Worker V1.2 (3D Printed Robot)

• Strengthening the torso and knee joints.
• Refinement of the sharp edges of the elbows

ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

[3DP RNS] Worker V1.1 (3D Printed Robot)

• Modify torso joints

ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

[3DP RNS] Worker V1.0 (3D Printed Robot)

• Series : 2 Legs / Humanoid Type [Youtube Video]
• This Is an all at once print. Assembly not required :)
• If you subscribe to the YouTube channel [3DP RNS], ★ a new robot will be revealed.
• Thank you for your subscribing! It means a lot to me :)
• More robots and a commercial license [Patreon]

※ Notice
For my uploaded robot model to enable all joints to move, it's advisable to use a Brim. 
If removing Brim is inconvenient or challenging, I don't recommend printing it. 
Also, joint functionality may vary depending on the printer and filament you use.
I hope your print is successful and you can have a robot with well-functioning joints.

ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

[3DP RNS] Worker V2.0 (3D Printed Robot)

• [3DP RNS] Worker V2.0 Download [Patreon]
• Worker V2.0 can be obtained through Patreon (Hero) membership.
• There have been some changes to the joints and additional design details have been added.

ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

[3DP RNS] Astro V1.0 (3D Printed Robot)

• [3DP RNS] Astro V1.0 Download [Patreon]
• Astro V1.0 can be obtained through Patreon (Hero) membership.
• If the existing humanoid robot, Worker, had a design of straight lines, this robot has been designed with curves.