This is a low-cost, lightweight grip designed for the Bambu Lab blade, offering excellent functionality without using excess plastic.

Removing the support material can be a bit tricky — be sure to remove it all carefully. Any leftover support could interfere with the proper alignment of the blade, so take your time to get it clean.

Assembly Instructions:

1. Carefully remove all support material.
2. Insert the blade and make sure the holes are alligned
3. Screw in the bolts, making sure they don’t protrude from the other side. Remember, the bolts are only meant to keep the blade secure against horizontal forces — they shouldn’t clamp the blade tightly to the grip.

Tools needed:

1. 2x M2x8 bolts
2. The Bambu Lap blade
3. M2 Hex key

(All tools should come with the printer)