My AMS overlay design with slot numbers.
I used gray and white to make the numbers as visible as possible, but you can of course use any color combination.

I designed a version for users who mount their AMS lite on top of an A1 printer (AMS lite Top Mount for A1). link in the image.

See other projects I have done for AMS Lite:

AMS Lite Numbers  Top Mount

Bambu logo  on AMS lite

AMS Lite  Handle

Update !

I noticed that some users wanted to protect their Bowden tubes from the excessive wear and tear of tugging, and I thought it might make sense, so I added Bowden tube holders to my earlier design.

The standard version and the version with Bowden tube protection have upside-down versions for people who mount the AMS on the wall or on dedicated stands.

Check the flow ratio before printing. My print has a few flaws, but they are visible only in photos, normally they are almost invisible.

Updated May 9, 2024

• I replaced the source files from stl to step, which makes the model walls smoother.
• Due to the information from the comments that the model is too tight in some cases, I increased the length by 0.5 mm, which should solve the problem. (the width is the same so I shouldn't be too loose)
• Attention! Models with increased length are only in my print profiles!