名称：AMSlite限位块
打印参数：材质为petg，喷嘴240℃，热床70℃，其余默认；
目的：原本官方AMS底座是重心向下，后面改装成平座，担心在打印过程中，会产生移位，因此设计限位块，只需要打印2个就可以，贴在对脚位置就可以，对角位置限制X向，Y向自由度，同时也便于Z向拿取；文件格式上传为STP格式，便于大家根据实际情况进行修改；
配件：打印整体不需要购买多余配件，但是打印精度存在毛刺，因此需自备锉刀；此外需要自备3M纳米无痕胶，打印完贴在背面，张贴到指定位置即可。
如果觉得还不错，满足你的预期，请帮我助力一下，再次非常感谢！

Name: AMSlate Limit Block
Printing parameters: Material is PETG, nozzle temperature is 240 ℃, hot bed temperature is 70 ℃, and the rest are default;
Purpose: Originally, the official AMS base had a downward center of gravity, but was later modified to a flat seat to avoid displacement during printing. Therefore, a limit block was designed, which only requires printing 2 pieces and can be attached to the opposite foot position. The diagonal position limits the freedom in the X and Y directions, and is also easy to retrieve in the Z direction; Upload the file format in STP format for easy modification according to the actual situation;
Accessories: Printing as a whole does not require the purchase of extra accessories, but there may be burrs in the printing accuracy, so a file needs to be prepared; In addition, you need to prepare 3M nano adhesive, print it and paste it on the back, and paste it in the designated position.
If you think it's not bad and meets your expectations, please help me out. Thank you very much again!