Night Owl BookMark

🌙 Night Owl – HueForge Bookmark Edition

Mysterious. Minimal. Mesmerizing.

This was the first bookmark I designed in HueForge — and it’s still one of the most loved. The Night Owl sits perched beneath a quiet moon, with just enough detail to pull you in, but not so much that it loses its elegant simplicity.

It’s designed for any single-extruder printer, and doesn’t require an AMS. A second print profile is available with pre-set pause layers, making it easy to achieve perfect filament swaps on almost any machine.

📐 Model Details

Size: 42 mm x 145 mm
Layer Height: 0.08 mm
Infill: 100% (required for clean color contrast)
Supports: None
Brim: Optional but recommended for better adhesion
Base Layer: 0.16 mm

🎨 Filaments Used (4 colors)

Use any opaque PLA in roughly these shades:

Black – deep, opaque black for the silhouette
Blue – rich mid / dark blue
Purple – vibrant purple accent
Yellow – warm yellow for the moon and highlights

⏸️ Manual Color Change Instructions (AMS-Free Profile)

This model is fully AMS-free when using the alternate print profile with pause layers.
Use the following filament swap points (based on 0.08 mm layer height):

Start with Black
At Layer #10 (0.80 mm): switch to Blue
At Layer #14 (1.12 mm): switch to Purple
At Layer #19 (1.52 mm): switch to Yellow
Print Yellow through to the final layer (Layer #25 ≈ 2.00 mm)

✅ No AMS or multi-material system needed — just pause and swap when prompted.

📦 Includes

AMS profile (standard)
AMS-free manual pause version
HueForge depth-optimized STL
Previews & photo examples

Thanks for scrolling all the way down — you’re officially a real one 🫶
Your support makes this possible and keeps creators like me designing through midnight prints and caffeine crashes.