3D printable PC case for a mini ITX motherboard, SFX power supply, GPU of a simmilar size to a RTX3060 and for a fan dimensions 120x120x15-25 mm.

Only parts you need to buy are 16 magnets size 6x1 mm and M3 heatset inserts.

For most of the assembly of the plastic parts I used epoxy glue and superglue for the magnets and the stands.

Parts named L are on front of the motherboard and named R are on the rear of the motherboard.

Upper and lower housing are positioned together with 2 round pins and 2 triangle pins (which are different sizes!), I glued in the pins and also the touching sufaces of the housings.

The bottom clear honeycombs are a bit harder to insert, but it goes together once you get it. the other honeycomb parts fit together without any problems.

The button is made for a reset switch, tolerances are a bit tight so beware. The buttons inner housing also has a hole for a 5 mm LED but i did not install it on mine.