Rey & BB8 Hueforge

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: [https://buymeacoffee.com/heyben](https://buymeacoffee.com/heyben)

Rey & BB8 Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 1.1mm
The Max Depth is 3.2mm and the Actual Depth is 2.7mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.2
    PLA Panchroma PLA Translucent Grey Transmission Distance: 6.8
    PLA BambuLab Basic Orange Transmission Distance: 5.2
    PLA PolyLite Lemon Yellow Transmission Distance: 5.7
This print uses 4 unique filaments

***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions:
    Start with Black
    At layer #15 (1.28mm) swap to Translucent Grey
    At layer #19 (1.6mm) swap to Orange
    At layer #26 (2.16mm) swap to Lemon Yellow for the rest.

Check out my STAR WARS COLLECTION here

Check out my Hueforge Display Collection here (Frames, Stands, Book Nooks)

Check out my other models and hueforge files here

Don't forget to post pictures of your prints! Enjoy!

Descrição