iPhone 15 Pro Zigzag Case Customizable Button

Features:

Buttons and camera protector colors are fully customizable.
Supports PLA, PETG, and TPU printing (showcase model printed in PLA).
Use Arachne wall generator with a 0.4mm nozzle to prevent gaps in fine details (<0.45mm).
Physically tested with an iPhone prototype for a precise fit.
Camera button area is fragile—install carefully.
PLA/PETG cases may break when removing the phone
The installation method for the 15 Pro camera protector is different from what is shown in the video. Please refer to the following installation instructions.
Due to material shrinkage, the buttons may fit too tightly depending on the filament used. If this happens, try carefully sanding the top edge of the button hole with a small file to remove any leftover support material, or scale the button’s X axis to around 98% (as shown below) before printing for a better fit.
Do not remove the outer skirt on the button — it’s designed to prevent the button from falling out.