INTRODUCTION:

Hello everyone, I created this big dollhouse for my daughter. I must tell you that the printing process was endless, but the result is worth it, and the joy in my child's eyes is priceless.

The house is designed in a pink/gray/white combination, but you can customize the colors to your liking.

Each plate is designed to allow for color changes between printing individual parts (if you don't have an AMS like me).

PRINTING:

1. The parts of the house are spread across 7 plates.
2. It is very important to review the manual (below) for each plate of the house. Each manual is labeled with the plate name in the left corner of the image, where the specific parts of the house are located and marked with numbers.
3. After printing the individual plates, it is important to check the numbers of the house parts (marked with numbers in the slicer) and then assemble them according to the attached CONSTRUCT graphic.

ASSEMBLY:

1. Review all CONSTRUCT images below.
2. It is important to check each part of the house and compare it with the manual to ensure the parts fit together.

3. I also used instant glue. I recommend it to you as well.

   ______________________________________________________________________________________________________________________________________________

BASIC INFORMATION:

The house dimensions are: 550 x 110 x 340 mm (l x w x h) The total printing time for all parts is 1 day, 14 hours, and 49 minutes. It is important to use glue even if the parts fit together.

PRINTING DETAILS:

The print is 10% infill 0.4mm nozzle 0.2mm layer height

Let me know if you need any further assistance!

____________________________________________________________________________________________________________________________________________________

____________________________________________________________________________________________________________________________________________________

PRINT MANUAL:

CONSTRUCT