A bold and gritty Hueforge Deadpool artwork features a distressed, dripping red and black design with sharp white eyes, creating a striking, textured look.

HueForge Info

• Z Scaling : Adjusting the Z-axis scaling on any Hueforge will disrupt the intended coloring and result in an inaccurate print. However, you can modify the X and Y scaling to resize the image—just ensure you scale both axes by the same percentage for consistency.

   

• Filament Selection: For an accurate print that matches the reference photos, you must use the same filament colors listed below. While switching brands is possible (as long as they are similar), changing filament colors will alter the final outcome.

   

• Slicer Preview vs. Final Print: What you see in the slicer will not exactly match the final print. Hueforge relies on color bleed to create blended effects that emerge during printing.

   

• Bed Adhesion: Ensure strong bed adhesion to prevent lifting and warping, which could ruin your print.

 You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.5mm and the Actual Depth is 2.6mm

Filaments Used:

    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Matte Scarlet Red Transmission Distance: 2

This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (1.28mm) swap to Jade White
    At layer #16 (2.08mm) swap to Scarlet Red