Summary

If you enjoy my design, please go ahead and like it, as it helps other people find it!

This is my custom 3D printer torture test.
Retraction Test
Bridging Test
Cooling Test
Flow Test

Dimensional Accuracy Test:
Use Calipers to measure the cube, dimensions should be 20 x 20
Holes should fit filament through, as the holes are 1.8 mm in diameter

Surfacing Test
Belt Tension Test
Line Width Test

First Layer - The bottom right has three different layers. Use a calipers to measure the three heights 0.6, 0.4, and 0.2. Take the proposed and the actual height to help you calibrate your Z height.

Overhang Test

The entire model is 100 mm by 50 mm

If you print this, please upload a picture under makes. I would like to see how it works for you.

Thanks!