This is a hueforge with a world population density map. Please see the colors below:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

You may print at higher layer heights below the Min Depth of 0.28mm
The Max Depth is 2mm and the Actual Depth is 2.1mm

Filaments Used:
    PLA PolyTerra Charcoal Black Transmission Distance: 0.3
    PLA PolyLite Polymaker Teal Transmission Distance: 0.5
    PLA PolyLite Natural Transmission Distance: 21
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Charcoal Black
    At layer #9 (0.52mm) swap to Polymaker Teal
    At layer #11 (0.6mm) swap to Natural
    At layer #16 (0.8mm) swap to Red
    At layer #26 (1.2mm) swap to White for the rest.