Project: Psycho_house

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x163.13mm in size
 

You may print at higher layer heights below the Min Depth of 0.48mm
 

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA+ Esun Space Blue Transmission Distance: 3.5
    PLA BambuLab Basic Silver Transmission Distance: 0.5
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Space Blue
    At layer #13 (1.12mm) swap to Silver
    At layer #18 (1.52mm) swap to White for the rest.