Handle for hacksaw

Fits saws with 25mm width.

Parts needed for assembly:

• 5 M3 screws with round head (6mm head with 3mm thread)
• 5 M3 nuts (5.5mm)
• 2 M3 washers for securing the saw (6mm)

After printing, please remove supports by threading the screws in the holes, and then you can press the nuts in.

It can be used without cutting the screws to length, but I recommend cutting them so you can use both sides of the saw.
I recommend wrapping the handle in some cloth or pvc tape so it not that harsh on the hand.

This is my first model, please criticize my work!