As you can see in the photos, I achieved excellent results. If you get poor results, please check your filament and settings before leaving negative feedback. Issues are often caused by old or damp filament, a poorly calibrated printer, etc

Here are some very useful boxes for storing your small items. In my case, I use them to store my screws, nuts, and other small parts.

These boxes can be stacked even with the labels present.

If you want to prevent the boxes from moving, you can use a Gridfinity Baseplate... it's not necessarily required.

Dimensions in mm: 125.5 x 83.5 x 38.8 (Height)

I designed these boxes to accommodate customizable labels (BambuStudio - Text Shape)… See photos.

You can print the labels in multiple colors, ideally with an AMS, but you can also do it without one by manually changing the filament.

If you do not have an AMS, you can use the print profile ”A1FilamentChangeLabel_Text". Simply use the "print profile A1 A1FilamentChangeLabel_Text." When the printer pauses, you will need to change the filament using the printer's screen. It's easy, but if you have any trouble, leave me a message, and I'll help you.

If you have an AMS, you can use the print profile “AMS_abel_Text”

Recommendations for printing:
For this model, I used PLA. The print settings are already included in the print profiles. As you can see in the photos, I achieved excellent results. If the print quality is not good, please check your print settings and the quality of your filament.