I needed to do something with the clock kit my P1S came with and didn't like any of the other models I saw. I figured, why not make a hidden stash clock? 

I spent $30 trying to find a hinge for this setup that worked well when [https://makerworld.com/en/@SigmaT4](https://makerworld.com/en/@SigmaT4) had a great printable working model already that I could use for this application. DOH! 

All credit for the hinge goes to @SigmaT4, please go support his page! 

I sized the toy fidget hinge version down 75% to ensure proper fit.

[https://makerworld.com/en/models/195411#profileId-217684](https://makerworld.com/en/models/195411#profileId-217684)

There are a couple extra items you'll need for this setup and a couple tools to make the build easier:

Recommended: 

Needle Nose Pliers (some of the supports and base supports are tricky to remove)

Xacto Knife to clean up rough edges

Double Sided tape - to estimate hinge placement and child lock placement

Required:

Super Glue (Hinges)

Bambu Clock Kit

Magnetic Child Cabinet Lock

Tips:

Don't attach the Bambu clock kit until you get the door placed properly and glued down after testing for door closure fitment. 

There is a small metal band under the double sided tape circle on the magnet key dock, I used double sided tape to attach the small metal band instead of the plastic dock since there isn't much room to work with in the cutout for the key underneath the clock. 

Be careful with the glue, if you get it on the plastic it will turn the PLA white. (you can see this in places where I wasn't cautious on the model pics)