Eevee Evolution Glaceon Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x199.87mm in size
You may print at higher layer heights below the Min Depth of 1.4mm
The Max Depth is 3.3mm and the Actual Depth is 3.1mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
    PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
    PLA Default White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #20 (1.68mm) swap to Ice Blue
    At layer #24 (2mm) swap to Marine Blue
    At layer #28 (2.32mm) swap to Ice Blue
    At layer #32 (2.64mm) swap to White for the rest.

This Hueforge is meant to be a bit thicker than the average Hueforge prints.
Artist: Sarah Richford - eeveelutions Glaceon

Descrição