[https://makerworld.com/en/models/1409237-better-a1-a1mini-enclosure#profileId-1462710](https://makerworld.com/en/models/1409237-better-a1-a1mini-enclosure#profileId-1462710) ← new better version

Hi, this is project i was working on for about a month. 

This is my attempt on enclosure for a1 or a1mini. 

I based this enclosure on modules, that you can easily join together and decide, what is your enclosure size should be.

A1? no problem, 

a1 mini, no problem

AMS? Just make it wider

you want to store your filament above in separate compartment? Here you go, just route ptfe tubes to second compartment above 3d printer.

You have a lot of possibilities here, just measure size and print elements, connect them with pins, and if you are sure size is correct, you can glue them with silicone to ensure no air leakage.

Added some mods for this, 

silica gel holder, based on popular silica gel container and modified cap to insert to full elements from inside

80mm fan holder, to extract hot air from inside

At last you can finish your build as i did, with some plexi glass 2mm in my case it was 50x40, 40x40x2 and 30x40, with parametric hinge and lock mechanism of your choice

With 80mm fan going at 40% temp inside stabilizes at around 31.5 degrees

16.02.2025 - added documentation