Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Customizable Shoe Rack Display
A modular shoe rack system that you can customize to fit your needs!
Quick Start Guide
- Default setup uses 3/4" wooden dowels (any length) and M4 12mm screws
- Can be expanded vertically by printing additional upper stage sets
- Shoes display at a 17° angle for optimal visibility (variable: assembly_angle)
Materials Needed
- Wooden dowels (Default: 3/4" diameter)
- M4 12mm screws
- Recommended parts (optional):
Important Notes for Printing
When printing the upper stage, you need to print both side versions:
‘side_version = 1; (Left Side) side_version = 2; (Right Side)’
when printing the lower base stage you need to print both 'plate 1' and 'plate 2'
Customization Options
You can modify all measurements to create your perfect display! Here are the key parameters organized by category:
Holder Dimensions
| Parameter | Description | Default |
|---|---|---|
| pole_diameter | Dowel diameter | 19.8mm (3/4") |
| holder_wall_thickness | Thickness of holder walls | 4mm |
| holder_height | Height of each holder | 12mm |
Main Pattern Settings
| Parameter | Description | Default |
|---|---|---|
| num_holders | Number of holders per side | 3 |
| holder_spacing | Distance between holders | 95mm |
| assembly_angle | Shoe slope angle | 17° |
| end_extension_length | Length of vertical end pieces | 30mm |
Mounting Hardware
| Parameter | Description | Default |
|---|---|---|
| mounting_hole_diameter | Screw hole size | 4mm (M4) |
| screw_head_recess_depth | Depth for screw head | 2mm |
| screw_head_recess_diameter | Diameter of screw head recess | 7mm |
Connector Settings
| Parameter | Description | Default |
|---|---|---|
| main_connector_width | Width of horizontal connectors | 9mm |
| main_connector_height | Height of horizontal connectors | 7mm |
| bottom_support_width | Width of bottom support bar | 9mm |
| bottom_support_height | Height of bottom support bar | 12mm |
Diagonal Braces
| Parameter | Description | Default |
|---|---|---|
| diagonal_brace_width | Width of diagonal supports | 4.5mm |
| diagonal_brace_height | Height of diagonal supports | 7mm |
Edge Smoothing
| Parameter | Description | Default |
|---|---|---|
| holder_edge_chamfer | Smoothing of holder edges | 1mm |
| main_connector_chamfer | Smoothing of connector edges | 2mm |
| diagonal_brace_chamfer | Smoothing of diagonal brace edges | 1mm |
Pro Tips
- For a different look, try using smaller diameter dowels and increasing the number of holders
- Adjust the assembly_angle to change how your shoes are displayed
- Increase holder_wall_thickness for more durability with heavier shoes
- The diagonal braces provide stability - adjust their dimensions based on your needs
Each parameter can be modified in the Customizer to create your perfect shoe rack display!
Example of 3 levels:
Fully Parametric Multi Level Shoe Rack
Publicado em 10 de fev de 2025
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta