Project: Expedition 71 Patch.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x163.73mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.4mm and the Actual Depth is 2.4mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PETG BambuLab Basic Blue Transmission Distance: 2.5
    PETG BambuLab Basic Lake Blue Transmission Distance: 4
    PETG BambuLab Basic Red Transmission Distance: 2.5
    PETG BambuLab Basic Orange Transmission Distance: 4.5
    PETG BambuLab Basic Yellow Transmission Distance: 6
    PETG BambuLab Basic White Transmission Distance: 3.5
This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.52mm) swap to Blue
    At layer #17 (0.8mm) swap to Lake Blue
    At layer #26 (1.16mm) swap to Red
    At layer #33 (1.44mm) swap to Orange
    At layer #38 (1.64mm) swap to Yellow
    At layer #48 (2.04mm) swap to White for the rest.