A convex display stand for holding object with a concave surface, is meant to be place inside the object.

Originally made for the Servitor Skull Measuring Tape by Queeblo, but thought other might also need something like this so decided to upload it :)

Dimensions (mm):

• Holder: 8x50x26, with a 6.1 diameter hole
• Rod 1: 8x50x8, with two 6 diameter connectors
• Rod 2: 8x70x8, with two 6 diameter connectors
• Stand: 50x50x7, with a 6.1 diameter hole

Included two rods I liked, but you can easily make shorter or longer by adjusting the MainRod in one of the DisplayHolder objects, just remember to offset the Connection1&2 based on your change.

Assemble is very straight forward and should not require any glue:

1. Remove the support materials for the holes, in the Holder and Stand
2. Remove the brim and supports from the Rod
3. Press the Rod into the holes in the Stand and Holder

Only tested this with my A1 mini for the Servitor Skull mention above, so not sure how good it works for other object :)