If Deep Space always fascinated you, you can keep wondering about it with this bookmark every time you read!

It is black and white model and comes with a hole for a strap in the top part. Feel free to remove and or play with it as you see fit.

Since the model has a lot of starts that are pointed it is surrounded by a white margin to avoid  damages to your precious books.

As usual you can scale on X&Y axis but do not scale on Z to not mess up layers and color changes.

If you do resize please remember to uncheck uniforme scale in the interface to avoid problems.

Print Instructions

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 44.11x154mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
    PLA PolyTerra Charcoal Black Transmission Distance: 0.3
    PLA JAYO White Transmission Distance: 7.2
This print uses 2 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to White for the rest.