Hitman Hue Forge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x109.21mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.1mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA PolyLite White Transmission Distance: 5
This print uses 2 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to White 
    At layer #13 swap to black for the border