Swatch MoonSwatch – Wall Clock — STL Grátis

Now you can hang up a wall clock that is inspired by the popular MoonSwatch!

Assembly instructions

The bezel and dial can be joined without screws. Align both parts carefully, then push them firmly together.

For the second hand, first remove the small black pin (marked in red) from the clock kit’s second hand. Then push the black pin through the printed second hand. Finally, assemble the hands on the clock kit in the order shown in the picture.

To achieve a glowing effect on the hour markers as shown, simply use glow instead of yellow filament.

Attention!

To print the bezel flawlessly, you have to remove the purge line directly after calibration or disable it completely. Otherwise it will interfere with the printed object and leave a mark.

Please note that this model has been shared for non-commercial, personal use only.

Also check out my other wall clocks:

[https://makerworld.com/collections/5716233-wall-clock-collection](https://makerworld.com/collections/5716233-wall-clock-collection)

If you value my work and would like to continue supporting me, you could buy me a coffee.
Any help is appreciated!

Descrição

Assembly instructions

Attention!

Swatch MoonSwatch – Wall Clock