6 colours hueforge . I have enable a pause to change colours in AMS.Have Fun!

Project: cute cat2.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm

The Model is 144.44x200mm in size
You may print at higher layer heights below the Min Depth of 0.44mm
The Max Depth is 2.5mm and the Actual Depth is 2.6mm

Filaments Used:
    PLA BambuLab Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA+ Esun Bone White Transmission Distance: 5
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #22 (0.96mm) swap to Blue
    At layer #24 (1.04mm) swap to Red
    At layer #28 (1.2mm) swap to Yellow
    At layer #32 (1.36mm) swap to Bone White
    At layer #47 (1.96mm) swap to Jade White for the rest.