Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 130x231.07mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
    PLA AzureFilm Black 
    PLA AzureFilm Basic Red 
    PLA AzureFilm White 
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Red
    At layer #13 (1.12mm) swap to White for the rest.