3D files for bracketry to build what ive dubbed the "Space Heater' mining rig frame. Small 4 card portable frame that you can carry from room to room with ease. One PSU means only one cable to plug in (assuming you have wifi).

Uses 3x 120mm Fans

You will need to print

(1x) PSUBracket1.stl
(1x) PSUBracket2.stl
(1x) GPUMountingBar1.stl
(1x) GPUMountingBar2.stl
(4x) RiserMount.stl
(1x) ExtrusionHandle.stl
(2x) FanMount1.stl
(2x) FanMount2.stl
(2x) FanMount3.stl
(2x) FanMount4.stl
(1x) SpaceHeaterBadge.stl (Optional)

Aluminum extrusion & parts

I ordered my extrusion from fazstore.ca. 20mm x 20mm extrusion

[https://www.fazstore.ca/product/20qe2020/](https://www.fazstore.ca/product/20qe2020/)

• (4x) 12 5/8" (vertical corner bars)
• (5x) 14 1/4" (top and bottom bars, and middle GPU mounting bar)
• (1x) 13 3/4' (top handle bar)
• (4x) 13 3/8" (horizontal side bars)

(9x) Plastic End Caps ([https://www.fazstore.ca/product/20ac7730/](https://www.fazstore.ca/product/20ac7730/))

(20x) Inside Corner Connectors ([https://www.fazstore.ca/product/20-series-inside-hidden-corner-connector-inside-to-inside/](https://www.fazstore.ca/product/20-series-inside-hidden-corner-connector-inside-to-inside/))

(30x) Screw and TNuts ([https://www.fazstore.ca/product/m5-x-8mm-button-head-socket-screw-standard-t-nut/](https://www.fazstore.ca/product/m5-x-8mm-button-head-socket-screw-standard-t-nut/))

(1x) Inside corner gusset - for attaching upper handle extrusion to rear gpu hold down bar underneath ([https://www.fazstore.ca/product/20-series-gusset/](https://www.fazstore.ca/product/20-series-gusset/))