Tarot cards from the game Phasmophobia made with Fusion360 and HueForge. 

Included is a 3mf file for the P1S with AMS. I slowed the speed down for the first layers because I used an effects plate and wanted a good finish, but feel free to change this setting. If you want to print it on another printer with a different build plate size or without an AMS, I included the stls. For all the tarot card stls, follow the instructions below. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Gray
    At layer #20 (1.68mm) swap to Jade White for the rest.

If you have some stringing, you can use a heat gun or hairdryer to remove most of it.