Complete kit of 3 parts to enclose and mount your Aqara wireless mini switch anywhere. The file includes the base, the cover and a blank button.  An optional plate includes several button faces you can choose from.   

The case skin can be surface or wall mounted with screws or equipped with magnets. For a snug fit, leave the foam ring in the back of the sensor.

Printing: No support needed, print and use.  No AMS required for the basic kit.  

If you want to print the icon buttons, an AMS is required. Icons must be printed with the color face down (on plate 2), no supports.

Mounting :  no6 US screws. (Holes are 4mm for the screws) or 4 x magnets (6x2mm round magnets, same as Gridfinity)

Assembly : 

1. Mount your base and insert your sensor in the base
2. Insert the rond button icon in the cover using the 4 tabs to prevent rotation (the "IN"  text goes towards the sensor, shall not be visible after assembly)
3. Hold the button in place in the 4 locator pins and clip the cover.  TIP ! → Button cap falling off during clip in ? Place you button icon in the case cover and stick a little piece of Scotch 3M tape to hold the plastic button in place while you clip it in.
4. Slide the cover on the base.  The cover is multi-orientation, any side should work.  There are holes in the base no matther where you push the cover, it will clip.  You will note the very fine little plastic strings that support the side pressure tabs.  They are design to break (this is by design).  You can ignore them, they are used to allow printhing the overhangs. Its normal if they break and no worries if they don't.
5. Voilà !  To remove the sensor, 4 bottoms side pockets on the base allow you to insert a flat screwdriver to lift the sensor out.

Fit for : Aqara Wireless Mini Switch 3-Way Control Button for Smart Home Devices (Compatible with Apple HomeKit)

Part number : WXKG11LM / Requires the AQARA HUB via Zigbee Connection.

Shown in Bambu Labs White, Grey, Black and Sunflower Yellow PLA.

Licence and terms of use :

When you download the files, you understand and agree that this content is licensed under a Standard Digital File License.

You can : 

(✔) Personal use : Download the digital file(s) for free and print 3D parts from the digital file(s) for your own use.

You cannot :

(X) Sell parts : manufactured from the digital file(s) or any derivative of the digital file(s), no matter how the parts are made, how many parts are made.  This also prohibits you from selling parts made from the Digital file(s) on sites such as eBay, Etsy, FB marketplace or any other location. 

(X) Share the digital file(s) or resell them. 

Liability disclaimer and use:

By downloading the digital file(s) and making a 3D printed derivative object from it, you agree that you're doing it at your own risk and understand the limitations of 3D printed parts.  The digital file(s) are not a product and the design do not give any express or implied warranty that, any product made from the digital file(s), will work or perform in a certain way.