If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.

[https://paypal.me/muddymaker](https://paypal.me/muddymaker)

You will need 6 M3x25mm socket head fasteners, 2 Stainless steel dowel pins for the over centre latches (2mmx18mm). Optional 2 M3x35mm socket head fasteners for the 25mm strap anchor points on either end of the box. All the fasteners screw into the plastic.

I used these dowel pins that can be found on Bambu Labs maker's supply section.

Internal dimensions are: L78mm W134mm H60mm

External dimensions are: L112mm W160mm H77mm

There is a hidey-hole in the rear of the box if using the included insert sleeve for things like emergency cash etc.

The sci-fi box is lockable with a cable lock as shown in the photo description. It will accept up to a 4mm diameter cable. It can be locked on either end or both sides for maximum security. 

I recommend superglueing all the fasteners in if you need the box to be tamper proof to keep your other half out or your siblings out depending on your age lol.

I recommend the latches be printed with a CF filled polymer or ASA,ABS @100% infill for strength and durability. 

NB: All print files are in the correct print orientation.

No supports are required.

Happy printing.