T-Rex - Hueforge — STL Grátis

This is 4 colour Hueforge of a Tyranosaurus Rex.

I uploaded two sizes 200x200 X1/P1/A1 and size 180x180 for A1 Mini.
And thicker version with no border size 200x200. Swap instructions in profile description.

Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.

If you want stand for this print check out my Simple vertical stand.
For my Hueforge pictures with border choose the version with 3 mm gap.

If you like this picture, you can look at my other animal pictures here in this collection: [https://makerworld.com/en/collections/3530022](https://makerworld.com/en/collections/3530022)

Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 4
    PLA BambuLab Basic Gray Transmission Distance: 1.6
    PLA BambuLab Basic Jade White Transmission Distance: 4.8
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #12 (1.04mm) swap to Gray
    At layer #17 (1.44mm) swap to Jade White for the rest.

Descrição

T-Rex - Hueforge