This is an remix of the mechanical dice box. 
I extended the bottom part to have more surface to slide it easily. The original one was to thin to slide it with your fingers. (it's hurt)

After the print you have to remove all the supports, before you can slide it. 

Here is an good description what you need to do:

Video Instructions: [https://www.tiktok.com/t/ZTYfMyGVm/](https://www.tiktok.com/t/ZTYfMyGVm/)

After printing the file, the dial and doors will not be immediately moveable. Each will need to be carefully separated from the box underbody, without disassembling or breaking any component. Depending on your print settings, this may be more or less difficult than it is for others.