Modular Clamp for variety purposes.

Check out the links below to see applications :

Power Strip Holder - [https://makerworld.com/en/models/1044137#profileId-1029603](https://makerworld.com/en/models/1044137#profileId-1029603)

PCB holder - [https://makerworld.com/en/models/1044036#profileId-1029479](https://makerworld.com/en/models/1044036#profileId-1029479) (deprecated for this clamp)

Desk Bag hanger - [https://makerworld.com/en/models/1043939#profileId-1029347](https://makerworld.com/en/models/1043939#profileId-1029347) (deprecated for this clamp)

Adjustable Modular Tablet/Phone Holder - [https://makerworld.com/en/models/1141532#profileId-1144011](https://makerworld.com/en/models/1141532#profileId-1144011)

--------------------------------------------------------------------------------------------------------

UPDATE (25.07.06)

Universal Modular Clamp (v2) is posted. Attachment secure mechanism is improved for versatility. Check out the new design!

UPDATE (25.03.08)

Longer Clamp_bolts added.

Default Clamp_bolt has a thread length of 25mm. Longer Clamp_bolts with thread length of 40mm, 55mm, 70mm added on extra print profile.

Note : Although longer Clamp_bolts can extend the desk thickness range, the clamp might get bulky or it might not fit to some adaptors (e.g. Power Strip Holder)

--------------------------------------------------------------------------------------------------------

Consists of 3 main parts : 1) mainframe 2) bolt 3) grip plate

• You can choose the mainframe's width by following the information below.

Thickness of the desk/board you can clamp on : (mainframe thickness)-(Clamp_bolt length)+3mm ~ (mainframe thickness)-7mm

ex)

Thickness of the desk/board to clamp on is 13mm~28mm : 35mm mainframe, default Clamp_bolt

Thickness of the desk/board to clamp on is 28mm~43mm : 50mm mainframe, default Clamp_bolt

Thickness of the desk/board to clamp on is 43mm~58mm : 65mm mainframe, default Clamp_bolt

Thickness of the desk/board to clamp on is 58mm~73mm : 80mm mainframe, default Clamp_bolt

Thickness of the desk/board to clamp on is 28mm~58mm : 65mm mainframe, 40mm Clamp_bolt

• 2 rails are engraved on the mainframe to secure attachments
• Printing the mainframe with 100% infill is recommended to increase the strength

• In order to enhance the grip and prevent the clamp from slipping off, I recommend to attach adhesive tapes to increase the friction. (refer to the image below) I used climbing tape and it worked perfectly. Medical adhesive tape should do the job as well.

  

Optional parts(adaptors) are also provided : 1) vertical adaptor 2) horizontal adaptor

• Adaptors are used for various applications. You can make your own attachments as your needs! (ex. power strip holder, cup holder, headphone holder, pcb holder, etc.)
• You can 1) design your own attachments and superglue it to the printed adaptors. Or you can 2) design the attachment combined with the adaptor. (refer to the last line) Or 3) check out the links at the top to try some of the application attachments!
• Slide the adaptor into the rail of the mainframe to secure it
• You can use either vertical or horizontal adaptor depending on the application
• Vertical adaptor is capable of withstanding the downward force when used without horizontal adaptor. If you wish the vertical adaptor to withstand upward force as well, use the horizontal adaptor as well

• For those who wish to design their own attachments fused with the adaptor, refer to the sketch below.