Project: Carnage.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Paramount 3D Black Cherry Transmission Distance: 2
    PLA PolyTerra Lava Red Transmission Distance: 1
    PLA Overture Matte White Transmission Distance: 3.7
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Black Cherry
    At layer #12 (1.04mm) swap to Lava Red
    At layer #15 (1.28mm) swap to White for the rest.