Spenden über Kaffee …
Ko-Fi … [https://ko-fi.com/lagnor69](https://ko-fi.com/lagnor69)
PayPal … [https://www.paypal.com/donate/?hosted_button_id=7XBNU8XD2XFAE](https://www.paypal.com/donate/?hosted_button_id=7XBNU8XD2XFAE)

---------------------------------------------------------------------------------------------------------

Hier finden Sie die passenden Rahmen dazu

200 × 140 mm & 140 mm × 200 mm || All-in-One-Rahmen
[https://makerworld.com/de/models/897636#profileId-856000](https://makerworld.com/de/models/897636#profileId-856000)

200 x 200 mm || All-in-One-Rahmen
[https://makerworld.com/de/models/766355#profileId-701658](https://makerworld.com/de/models/766355#profileId-701658)

---------------------------------------------------------------------------------------------------------

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 140x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Matte Dark Blue Transmission Distance: 1
    PLA GEEETECH Water Blue Transmission Distance: 5
    PLA PolyLite White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Dark Blue
    At layer #15 (1.28mm) swap to Water Blue
    At layer #23 (1.92mm) swap to White for the rest.