这是一套专为高效收纳设计的中型模块化储物系统，包含两种规格：

• 全大 - 基准尺寸，长宽比1:√2，最宽处220mm（含把手）
• 半大 - 全大盒子的一半大小，长宽比保持1:√2

特点：

• 完美堆叠：两种大小的盒子均可独立上下堆叠。半大盒子可在全大盒子上层堆叠2个（注：不可反向堆叠）。
• 多种分格版本：两种大小的模型均提供多分格版本（如2格、4格等）。
• A1/X1优化：全大盒子适配220mm打印板有效面积，支持X1、P1、A1系列直接打印。
• 无支撑设计：模型已全面优化，打印时建议启用平台附着辅助功能。

注意：

• 本模型已全面更新以匹配全系列堆叠标准。旧版模型（最大长度210mm，仅含全大尺寸，与当前版本不兼容）归档于 Legacy 目录，可按需下载。

可堆叠储物盒系列索引：

----------------------------------------

This medium-sized modular system is designed for efficient organization, featuring two sizes:

• Full - Base size with 1:√2 aspect ratio, 220mm maximum width (including handles)
• Half - Half the size of the Full box, maintaining the 1:√2 aspect ratio

Key Features:

• Perfect Stacking: Both sizes can be stacked vertically. Two Half boxes fit seamlessly on one Full box (Note: Reverse stacking is not supported).
• Customizable Dividers: Variants with compartments (such as 2 or 4 dividers).
• A1/X1 Optimized: Full box maximizes 220mm effective print bed width. Compatible with X1/P1/A1 series printers.
• Support-Free Design: Fully optimized for zero supports. Enable bed adhesion aids for reliability.

Note:

This updated version aligns with the full stacking series. Legacy models (210mm maximum length, single size only, incompatible with current versions) are archived in the Legacy  folder for reference.
 

Stackable Storage Box Series Index: