Project: LightHouse 2.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160x160mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:
    PLA+ Sunlu Black Transmission Distance:
    PLA+ Sunlu Grey Transmission Distance:
    PLA+ Sunlu White Transmission Distance:
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to Grey
    At layer #15 (1.28mm) swap to White for the rest.