UPDATED - Following feedback, I have added an additional plate to the model which holds a wider slot variant for larger cables

This is a simple cable clip which is compatible with Multiboard. It uses the push fit connection method and is designed to blend well with the Multiboard octagonal aesthetic.

The external dimensions match the snap fittings, and it protrudes 12mm from the board.

It incorporates a 4 mm hole to allow the cable to move freely when in use, and the cable slots in from the side - This was designed with 3mm clearance which, when combined with the flex in the item allows secure holding for all round USB cables I have access to. The clip will function when mounted to the board in any orientation allowing you to customise your set up.

There is now a second Build plate which includes a wider slot to account for larger cables.

Should the cable be pulled with force, it will detach successfully from the board when paired with the regular snap (stronger snaps are available from the Multiboard parts library but I would recommend the regular one for this reason.

To mount this to a multiboard, you will need a snap available here - [https://than.gs/m/974295](https://than.gs/m/974295)

All compatible mounting options and associated Multiboard items are available on the parts library :-[https://www.multiboard.io/parts-library](https://www.multiboard.io/parts-library)

Item shared in good faith following the multiboard license available here - [https://www.multiboard.io/license](https://www.multiboard.io/license).

This item is Designed completely in Freecad by myself, using the push fit horizontal positive .STEP file provided by the original creator Keep Making - www.Multiboard.io