***WARNING***PLEASE READ***(4/4/25) So I guess Bambu has decided to convert all print profiles on MakerWorld to version 2 of BambuStudio. What does that mean? Well, I really don't know, I'm not really all that computer/tech savvy. But from my understanding from other Facebook posts, if you have not upgraded to version 2 of BambuStudio and try to open/slice one of mine or any others print profiles, all you will get is the profile geometry. You won't get my custom settings I use for HueForges. You won't get the color swaps preloaded. I've also heard that even if you have upgraded to version 2, the colors and color swaps may or may not be there but I've also heard that some of the custom settings won't be there. I will be upgrading to version 2 this weekend and will slowly go back and reslice and upload new print profiles for all my profiles. In the meantime, down below I do have the filament used and where the color swaps happen so if you upload one of my profiles and it not working right, you can manually enter the filament swaps and if you need any help with settings, please reach out. I will try to get everything updated and back to normal as soon as possible. Thank you all for your downloads, prints, ratings, comments and boost, they are all greatly appreciated. Happy Printing.***

Another winter Jeep Hueforge. I hope you enjoy. Leaving a rating and a boost if you have one to spear is greatly appreciated. Thank you and happy printing.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Beige Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Blue Gray
    At layer #16 (1.36mm) swap to Beige
    At layer #18 (1.52mm) swap to Jade White for the rest.